JLG 723A Service Manual - Manual (Page 107)

8-25 L2906H, 2906H, 3507H, 619A, 723A, 29.6LP, 29.6, 35.7
Hydraulic System
8.12.8 Hydraulic Cylinder Torque
Specifications
Description L2906H, 2906H, 29.6 & 619A 3507H, 35.7 & 723A
All Cylinder Set Screws 20-25 Nm (15-18 lb-ft) 20-25 Nm (15-18 lb-ft)
Lift/Lower Cylinder
Head Gland 500-550 Nm (369-406 lb-ft) 700-750 Nm (516-553 lb-ft)
Piston 2160-2210 Nm (1593-1630 lb-ft) 2630-2680 Nm (1940-1977 lb-ft)
Extend/Retract Cylinder
Head Gland 300-350 Nm (221-258 lb-ft) 300-350 Nm (221-258 lb-ft)
Piston 550-600 Nm (406-443 lb-ft) 550-600 Nm (406-443 lb-ft)
Tilt Cylinder
Head Gland 400-450 Nm (295-332 lb-ft) 700-750 Nm (516-553 lb-ft)
Piston 1285-1335 Nm (948-985 lb-ft) 2630-2680 Nm (1940-1977 lb-ft)
Compensating Cylinder
Head Gland 400-450 Nm (295-332 lb-ft) 400-450 Nm (295-332 lb-ft)
Piston 1115-1165 Nm (822-859 lb-ft) 115-1165 Nm (822-859 lb- ft)