3 specifications, 1 travel speed, 2 hydraulic cylinder performance specifications – JLG 723A Service Manual User Manual
Page 23: 3 electrical system, Specifications, Travel speed, Hydraulic cylinder performance specifications, Electrical system
2-11
L2906H, 2906H, 3507H, 619A, 723A, 29.6LP, 29.6, 35.7
General Information and Specifications
2.3
SPECIFICATIONS
2.3.1
Travel Speed
2.3.2
Hydraulic Cylinder Performance Specifications
Note: Machine with no load, engine at full throttle, hydraulic oil above 54° C (130° F) minimum, engine at operating
temperature.
2.3.3
Electrical System
Note: Refer to Section 9.8, “Fuses and Relays,” for more information.
L2906H, 2906H, 29.9LP, 29.6 & 619A
3507H, 35.7 & 723A
First Gear
10 kmph (6 mph)
7 kmph (4 mph)
Second Gear
34 kmph (21 mph)
33 kmph (20 mph)
Function
Approximate Times (sec.)
Boom Extend
6
Boom Retract
4
Boom Lift
6
Boom Lower
4
Quick Attach - UP
2
Quick Attach - DOWN
2
Battery
Type, Rating
12V, Negative (-) Ground, Tapered Top Post, Maintenance Free
Quantity 1
Reserve Capacity
1000 Cold Cranking Amps @ -18° C (0° F)
Group/Series
BCI Group 31
Alternator
12V, 95 Amps
Starter
12V, 3,0 KW Type EV (Gear Reduction)