JLG 723A Service Manual - Manual (Page 24)

General Information and Specifications
2-12 L2906H, 2906H, 3507H, 619A, 723A, 29.6LP, 29.6, 35.7
2.3.4 Engine Performance Specifications
2.3.5 Tires
Note: Standard wheel lug nut torque is 300 Nm (220 lb-ft).
Note: Pressures for Foam filled tires are for initial fill ONLY.
Description
Engine Make/Model Deutz TCD2012L04V02 Tier III
Low Idle 925 ±50 rpm
High Idle 2370 ±50 rpm
Horsepower 74.9 kW/100.4 BHP @ 2200 rpm
Fuel Delivery Fuel Injection
Air Cleaner Dry Type, Replaceable Primary and Safety Elements
Average Fuel Consumption (dependant on load/duty) 6,1 I/hr (1.6 gal/hr)
Size Tire
Type
Minimum Ply/
Star Rating
Fill Type Pressure
405/70-20
(L2906H, 2906H & 3507H)
MPT-01 Bias - 14 Ply Pneumatic 3,5 bar (51 psi)
405/70-24
(2906H, 3507H, 29.6 & 35.7)
MPT-01 Bias - 14 Ply Pneumatic 4,0 bar (58 psi)
405/70-20
(L2906H, 2906H,3507H & 619A)
MPT-04 Bias - 14 Ply Pneumatic 3,5 bar (51 psi)
405/70-20
(619A)
MPT-04 Bias - 14 Ply
Foam - Approx. 200 kg
(441 lb)
405/70-24
(2906H, 3507H, 29.6, 35.7 & 723A)
MPT-04 Bias - 14 Ply Pneumatic 4 bar (58 psi)
405/70-24
(723A)
MPT-04 Bias - 14 Ply
Foam - Approx. 240 kg
(529 lb)
400/70R20 XMCL Radial Ply Pneumatic 4 bar (58 psi)
445/70R24
(3507H, 35.7 & 723A)
XMCL Radial Ply Pneumatic 4,1 bar (60 psi)
460/70R24
(3507H, 35.7 & 723A)
EM-01 Radial Ply Pneumatic 4 bar (58 psi)