JLG 723A Service Manual - Manual (Page 65)

5-11 L2906H, 2906H, 3507H, 619A, 723A, 29.6LP, 29.6, 35.7
Axles, Drive Shafts, Wheels and Tires
2. Install washers on the wheel studs.
3. Start all lug nuts by hand to prevent cross threading.
DO NOT use a lubricant on threads or nuts.
4. Tighten lug nuts in an alternating pattern as
indicated in figure. Torque to 300 Nm (221 lb-ft).
5. Remove machine from supports,
6. Remove the Do Not Operate Tag from the ignition
key switch and the steering wheel.
5.7 STEERING ANGLE ADJUSTMENT
Detailed axle service instructions are provided in the Axle
Disassembly & Assembly Manual, refer to Section 5.4.2,
“Axle Specifications.”
5.8 BRAKES
5.8.1 Brake Disc Inspection
Detailed axle service instructions are provided in the Axle
Disassembly & Assembly Manual, refer to Section 5.4.2,
“Axle Specifications.”
OAH0990
1
2
3
4
5
6
7 8