JLG E300 Operator Manual - Manual (Page 55)

SECTION 4 - MACHINE OPERATION
3121214 – JLG Lift – 4-9
TO AVOID SERIOUS INJURY, DO NOT OPERATE MACHINERY IF ANY
CONTROL LEVER OR TOGGLE SWITCH CONTROLLING PLATFORM
MOVEMENT DOES NOT RETURN TO THE ‘OFF’ OR NEUTRAL POSITION
WHEN RELEASED.
TO AVOID A COLLISION AND INJURY IF PLATFORM DOES NOT STOP
WHEN A CONTROL SWITCH OR LEVER IS RELEASED, REMOVE FOOT
FROM FOOTSWITCH OR USE EMERGENCY STOP SWITCH TO STOP THE
MACHINE.
Swinging the Boom
Depress footswitch to swing boom, with footswitch activated,
position SWING control switch to RIGHT or LEFT for direction
desired.
WHEN SWINGING THE BOOM MAKE SURE THERE IS AMPLE ROOM FOR
THE BOOM TO CLEAR SURROUNDING WALLS, PARTITIONS AND EQUIP-
MENT.
Raising and Lowering the Upper Boom
Depress footswitch to raise or lower the Upper Boom, with foot-
switch activated, position Upper Boom Lift switch to UP or
DOWN until desired height is reached.
4.8 BOOM FUNCTION SPEEDS
The Function Speed Control affects the speed of boom func-
tions LIFT, TELESCOPE, and SWING. Turn the control CW to
increase function speed or CCW to decrease function speed.