JLG 3246ES Operator Manual - Manual (Page 57)

SECTION 4 - MACHINE OPERATION
3121165 – JLG Lift – 4-7
4.6 PARKING AND STOWING
Park and stow the machine as follows:
1. Drive the machine to a reasonably well-protected and
well-ventilated area.
2. Ensure the platform is fully lowered.
3. Position the emergency stop switch to the "Off" posi-
tion.
4. If necessary, cover the instruction placards, caution
and warning decals so that they will be protected from
hostile environment.
5. Chock at least two wheels when parking the machine
for an extended period of time.
6. Turn the power selector switch to "Off" and remove
the key to disable the machine and prevent unauthor-
ized use. The platform control station can also be
secured to it’s mounting plate, see Figure 4-2.
7. If equipped with the optional anti-vandal package, the
platform and ground control box assemblies may be
covered and locked to prevent access.
NOTICE
DO NOT OPERATE MACHINE FROM THE PLATFORM OR GROUND CONTROLS
WITH THE ANTI-VANDAL COVERS CLOSED AND LOCKED IN PLACE.
NOTE: If machine is not equipped with the anti-vandal covers
option to prevent unauthorized removal, the platform
control station can be secured to it’s mount by placing a
lock through one or more of the holes located on it’s upper
mounting tabs.
Figure 4-2. Securing Control Station to Platform