JLG 15VPSP Service Manual - Manual (Page 53)

SECTION 2 - SERVICE PROCEDURES
3120797 – JLG Lift – 2-35
2.12 PREVENTIVE MAINTENANCE AND
INSPECTION SCHEDULE
(See Figure 2-3)
The preventive maintenance and inspection checks are
listed and defined in the following table (See Figure 2-3,
this chapter). This table is divided into two basic parts, the
“AREA” to be inspected and the “INTERVAL” at which the
inspection is to take place. Under the “AREA” portion of
the table, the various systems along with the components
that make up that system are listed. The “INTERVAL” por-
tion of the table is divided into five columns representing
the various inspection time periods. The numbers listed
within the interval column represent the applicable inspec-
tion code for which that component is to be checked.
The checks and services listed in this schedule are not
intended to replace any local or regional regulations that
may pertain to this type of equipment nor should the lists
be considered as all inclusive. Variances in interval times
may occur due to climate and/or conditions and depend-
ing on the location and use of the machine.
JLG Industries requires that a complete annual inspection
be performed in accordance with the “Annual Machine
Inspection Report” form. Forms are supplied with each
new machine and are also available from JLG Customer
Service. Form must be completed and returned to JLG
Industries.
IMPORTANT
JLG INDUSTRIES REQUIRES THAT A COMPLETE ANNUAL
INSPECTION BE PERFORMED IN ACCORDANCE WITH THE
“ANNUAL MACHINE INSPECTION REPORT” FORM.