JLG 660SJ Service Manual User Manual
Page 82
Advertising
SECTION 3 - CHASSIS & TURNTABLE
3-32
– JLG Lift –
3120840
4.
Assemble the sealing ring. The fitting tool will hold
the sealing ring in the correct position in the pump
housing.
5.
Assemble the snap ring.
6.
Assemble
the snap ring in the correct position.
Disassembly and Assembly
1.
Disassemble
the pilot valve.
2.
Mark the position of the port plate and remove the
socket screw from the port plate.
3.
Remove the port plate together with the valve plate
(hold the valve plate so that the plate can’t fall
down).
Advertising
This manual is related to the following products: