Electric winch, Spare tire mounting, Spare tire bracket – JLG Triple-L Operator Manual User Manual
Page 38
SECTION 3 - ACCESSORIES
3-2
– Triple-L-Trailer –
3121224
Electric Winch
• 12 Volt
• Freespooling clutch
• Power In & Out
• 12 ft. Remote Control
• 50 ft. Steel Cable
• 4500 lbs. Rated Line
• 5100 lbs Stall Load
• Front Trailer Rail Mounting
Spare Tire Mounting
If your trailer is equipped with the spare tire bracket
option, use the following instructions to mount the spare
tire to the bracket.
1.
Locate the spare tire bracket on the right side of the
trailer near the front.
2.
Place the tire on the frame tube with the threaded
stud on the spare tire bracket through the center
hole of wheel.
3.
Adjust the wheel as close to center over the
threaded stud located on the spare tire bracket.
4.
Place the plate in front of the wheel and over the
threaded stud
5.
Place the washer onto the threaded stud in front of
the plate.
6.
Thread the nut onto the threaded stud and using a
3/4" socket, tighten the nut.
AFTER MOUNTING IS COMPLETE, ENSURE THAT TIRE IS REST-
ING ON THE FRAME TUBE, FIRMLY GRASP AND TRY AND MOVE
THE SPARE TIRE TO ENSURE IT IS PROPERLY TIGHTENED.
Spare Tire Bracket
This bolt on bracket attaches directly to the chassis frame.
The spare tire is carried neatly over the frame.
1.
Threaded Stud
2.
Spare Tire Bracket
3.
Plate, Washer and 3/4" Nut