JLG 45e Operator Manual - Manual (Page 20)

SECTION 2 - PREPARATION AND INSPECTION
2-4 – JLG Lift – 3120860
Figure 2-2. Boom Nomenclature. (40/n40/45 electric)
9. Check all pin and shaft retaining hardware for secu-
rity and wear.
10. Check Upper Upright, cross pins and hydraulic lines
for damage, wear, lubrication, leakage and security.
11. Check Upper Upright for damage, wear, lubrication
and security.
12. Check hydraulic lines mounted on upright for dam-
age, leakage and security.
13. Check Upper Boom Lift Cylinder and cross pins and
hydraulic lines for damage, wear, lubrication, leak-
age and security.
14. Check Upper Boom pivot pin for damage, wear,
lubrication and security.
15. Check Upper Boom for damage, missing parts and
security.
16. Check Upper Boom wear pads for damage, missing
parts and security.
17. Check Upper Boom telescope cylinder, cross pins
and hydraulic lines for damage, wear, lubrication,
leakage and security.
18. Check Platform Leveling Cylinder, cross pins and
hydraulic lines for damage, wear, lubrication, leak-
age and security.
Platform.
1. Check platform and control console for damage,
loose or missing parts, and security.