JLG 266 LoPro Operator Manual - Manual (Page 40)

Section 3 - Controls And Indicators
3-6 3126023
Ignition
• Position 0 - Engine off
• Position I- Voltage is available for all electrical functions. Engine preheat at
temperature below 0°C. Wait until indicator on instrument panel goes out.
• Position II- Prohibits rotating key switch to position 3 in the event the engine does
not start. Rotate the key to position 0 then back to position 3 to re-engage the
starter.
• Position III- Engine start.
OZ1110
I
II
III
0