JLG 266 LoPro Operator Manual - Manual (Page 54)

Section 3 - Controls And Indicators
3-20 3126023
11. LSI Switch (if equipped): When the switch is activated a light (18) on dash panel
illuminates. The automatic function cut-out (see page 3-18) is disabled.
12. Auxiliary Hydraulic Circuit/ Hydraulic Quick-Switch Button (if equipped): Press
button to select the desired auxiliary hydraulic circuit. See Section
5 - Attachments and Hitches for approved attachments and control instructions.
13. Front/Rear Hydraulic Select Switch: Press switch to second position to activate
rear hydraulics. Return switch to first position to activate front hydraulics.
14. Auxiliary Hydraulics Decompression Switch (CE) (if equipped): Depress button
to relieve pressure in auxiliary hydraulic circuit. Refer to page 5-10 for more
information.
15. Wheel Centering Indicator: Illuminates when rear wheels are centered.
16. Trailer Brake Indicator (Italian) (if equipped); Illuminates when trailer brakes are
activated.
17. Automatic Function Cut-out Indicator: Illuminates when the LSI is activated.
18. Trailer Light Indicator: Illuminates when the trailer lights are activated.
WARNING
TIP OVER HAZARD. Exceeding lift capacity of the telehandler could damage the
equipment and/or cause tip over.