JLG 266 LoPro Operator Manual - Manual (Page 112)

Section 7 - Lubrication and Maintenance
7-8 3126023
7.5 OPERATOR MAINTENANCE INSTRUCTIONS
Fuel System
A. Fuel Level Check
1. Check fuel gauge (1) located on instrument panel in cab.
2. If fuel is low, proceed to fuel source and perform “Shut-Down Procedure” on
page 4-3.
3. Turn fuel tank cap (2) and remove from filler neck (3). Add diesel fuel as
needed. Replace fuel tank cap.
Note: Replenish diesel fuel at end of each work shift to minimize condensation.
8
OW1150 OW0990
OAH0410
1
OAH0110
2
3