JLG 266 LoPro Operator Manual - Manual (Page 121)

Section 7 - Lubrication and Maintenance
7-17 3126023
Engine Cooling System
A. Engine Coolant Level Check
1. Perform “Shut-Down Procedure” on page 4-3.
2. Open the engine cover.
3. Check coolant level in overflow bottle (1). When coolant is hot, bottle should be
1/2 to 3/4 full. When coolant is cool, bottle should be 1/4 to 1/2 full.
4. If coolant is low, remove overflow bottle cap (2) and add coolant as required.
5. Replace overflow bottle cap.
6. Close and secure the engine cover.
50
OW0980
OW1070
1
OAH0060
2