Ignition, Ignition -6 – JLG 266 LoPro Operator Manual User Manual

Page 40

Advertising
background image

Section 3 - Controls And Indicators

3-6

3126023

Ignition

• Position 0 - Engine off

• Position I- Voltage is available for all electrical functions. Engine preheat at

temperature below 0°C. Wait until indicator on instrument panel goes out.

• Position II- Prohibits rotating key switch to position 3 in the event the engine does

not start. Rotate the key to position 0 then back to position 3 to re-engage the
starter.

• Position III- Engine start.

OZ1110

I

II

III

0

Advertising
This manual is related to the following products: