JLG 266 LoPro Operator Manual - Manual (Page 44)

Section 3 - Controls And Indicators
3-10 3126023
Wiper, Lights and Turn Signal Control Lever
1. Flash-to-Pass: Pull the lever back completely. The high beam indicator will light.
2. High/Low Beam: With the lights on, pull the lever to switch to high or low beam.
The high beam indicator will light when the high beam lights are on.
3. Left Turn Signal: Push the lever forward.
4. Right Turn Signal: Pull the lever backward.
5. Horn: Push the button.
6. Windshield Washer: Slide the sleeve toward the steering column.
7. Windshield Wiper: Rotate the sleeve to the desired setting, “O”-Off, “J”-Interval
or “I”-Continuous.