JLG 266 LoPro Operator Manual - Manual (Page 53)

Section 3 - Controls And Indicators
3-19 3126023
Control and Indicator Console
Controls and indicates the electrical accessories of the telehandler.
4. Parking Lights and Head Lights: Press switch to second position to activate
parking lights. Press switch to third position to activate head lights. Return
switch to first position to turn off lights
5. Boom Work Light Switch (if equipped): On/Off switch.
6. Front Work Light Switch (if equipped): On/Off switch.
7. Rear Work Light Switch (if equipped): On/Off switch.
8. Rotating Beacon Switch (if equipped): Place the magnetic base of the rotating
beacon on the cab roof. Power is supplied by a 12v receptacle at the left rear
part of the cab roof.
9. Rear Windshield Wiper and Washer Switch: Press switch to activate rear
wipers. Press and hold to third position to turn on washer. Return switch to first
position to turn off wipers.
10. Joystick Lockout Switch: LED lit while activated: The boom and auxiliary
hydraulic systems are disengaged. No functions can be operated with the
joystick. Front-Wheel Steer Mode must be active to proceed to Road Use
Operation.
OAH0213
6
4
8
5
7
9
10
11
12
13
14
15
16
17
18