JLG 266 LoPro Operator Manual - Manual (Page 55)

Section 3 - Controls And Indicators
3-21 3126023
Heater and Air Conditioner (If Equipped) Controls
1. Fan Speed: 3-position rotary switch for heater and air conditioner.
2. Temperature Control: Adjustable rotary switch.
3. Air Louver
4. Round Vent
5. A/C switch (if equipped): On/Off switch.
Heater
Turn the temperature control to the desired temperature and set the fan speed.
Adjust the air flow through the air louvers and round vents.
Air Conditioner (if equipped)
Turn on the air conditioner and set the fan speed. Adjust the air flow through the air
louvers and round vents.
Note: When the windows are misted over, run the air conditioner and heater at the
same time.
Defrosting
Direct the flow of air through the louvers and the left front round vent toward the
windshield. Close the other two round vents.
OAH0221
1
2
4
3 3
3
3
4
5