JLG 266 LoPro Operator Manual - Manual (Page 81)

Section 5 - Attachments and Hitches
5-9 3126023
Hydraulic Quick-Switch Device
This installation procedure is designed for one-person operation.
1. Retract quick-switch device to provide clearance.
Check to be sure lock pin is disengaged.
2. Align attachment pin with recess in attachment.
Raise boom slightly to engage attachment pin in
recess.
3. Engage quick-switch device.
4. Press the button (1) and at the same time
move the joystick (2) to engage or (3) to
disengage the quick-switch device.
5. Raise boom to eye level and visually
check that the quick-switch pin protrudes
through the hole. If the pin does not
protrude through the hole, place the
attachment on the ground and return to
step 2.
6. If attachment is equipped, connect auxiliary hydraulic hoses. See “Hydraulic
Operated Attachment” on page 5-10.
OZ0610
1
2
3
OZ0900
ENGAGED DISENGAGED