JLG 266 LoPro Operator Manual - Manual (Page 94)

Section 5 - Attachments and Hitches
5-22 3126023
Fork Mounted Hook
Description P/N
Fork Mounted Hook 4 ton (CE)....................................... 2700097
Fork Mounted Hook 4 ton (CE)....................................... 2700118
Use Fork Hook Attachment Capacity Chart
To determine maximum capacity, refer to “Telehandler/Attachment/Fork Capacity” on
page 5-2.
Suspend loads in accordance with requirements set forth in Section
1 - General Safety Practices.
The joystick (1) controls lift/lower movement of the boom and fork hook tilt.
• Move joystick left to tilt up.
• Move joystick right to tilt down.
The rocker switch (2) located on the boom joystick controls the extend/retract
movement of the boom.
Installation Procedure:
• Refer to “Attachment Installation” on page 5-7.
• Secure the fork hook to the forks by sliding the fork hook onto the parent forks
and install the retaining pin behind the vertical shank of the fork.
OY0640
OAH0351
2
1