JLG 18RS Operator Manual - Manual (Page 29)

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
3121283 – JLG Lift – 2-9
Figure 2-4. Daily Walk-Around Inspection Points - Sheet 2 of 2
8. Wheel/Tire Assemblies - Properly secured, no miss-
ing lug nuts. Inspect for worn tread, cuts, tears or
other discrepancies. Inspect wheels for damage and
corrosion.
9. Tie Rod and Steering Linkage - See Inspection Note.
10. Swing Motor and Worm Gear - No evidence of dam-
age. See Inspection Note.
11. Main Control Valve - See Inspection Note.
12. Turntable Bearing - Evidence of proper lubrication.
No evidence of loose bolts or looseness between
bearing and structure.
13. Fuel Tank - See Inspection Note.
14. Fuel Filter (Optional) - See Inspection Note.
15. Hood Assemblies - See Inspection Note.
16. Battery - Proper electrolyte levels if adjustable; cables
tight, no visible damage or corrosion.
17. Hydraulic Pump - See Inspection Note.
18. Turntable - See Inspection Note.
19. Frame - See Inspection Note.
20. Main Boom Sections - See Inspection Note.
21. Tower Boom - See Inspection Note.