Wheel torque chart -17 – JLG 18RS Operator Manual User Manual
Page 87
Advertising
SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121283
– JLG Lift –
6-17
mounting stud holes in the wheels. The proper procedure for
attaching wheels is as follows:
1. Start all nuts by hand to prevent cross threading. DO
NOT use a lubricant on threads or nuts.
2. Tighten nuts in the following sequence.
3. The tightening of the nuts should be done in stages. Fol-
lowing the recommended sequence, tighten nuts per
wheel torque.
4. Wheel nuts should be torqued before first road use and
after each wheel removal. Check and torque every 3
months or 150 hours of operation.
1
2
3
4
5
6
7
8
9
Table 6-9. Wheel Torque Chart
TORQUE SEQUENCE
1st Stage
2nd Stage
3rd Stage
40 ft lbs (55 Nm)
95 ft lbs (130 Nm)
170 ft lbs (230 Nm)
Advertising