JLG 18RS Operator Manual - Manual (Page 80)

SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6-10 – JLG Lift – 3121283
2. Swing Bearing/Worm Gear Teeth
Lube Point(s) - Grease Fitting
Capacity - A/R
Lube - Lubriplate 930-AAA
Interval - A/R
Lube Point(s) - Grease Fitting*
Capacity - A/R
Lube - Mobile SHC 007
Interval - A/R
DO NOT OVERGREASE BEARINGS. OVERGREASING BEARINGS WILL
RESULT IN DAMAGE TO OUTER SEAL IN HOUSING.
*If necessary install grease fitting into worm gear hous-
ing and grease. Replace fitting with pipe plug when
complete.