JLG 600SC_660SJC ANSI Service Manual User Manual
Page 74
Advertising
SECTION 4 - BOOM & PLATFORM
4-34
– JLG Lift –
3120794
NOTE: The following steps are adjusting parameters.
THRESHOLD/ MAX OUT/ RAMP UP/ RAMP DOWN/
LOW RANGE / TACHOMETER
1.
With the machine EMS up, foot switch pressed on,
you will now see the following display;
2.
Next push the (+) key. This should bring you to
THRESHOLD, now push the ENTER key you should
now see on the display BOTH THRESHOLD F and
the default settings blinking.
3.
Next push the ENTER key, this will now show the
individual THRESHOLD settings.
Advertising