9 machine orientation when setting speeds, Test notes, Machine orientation when setting speeds -23 – JLG T350 Service Manual User Manual
Page 183: Test notes -23

SECTION 6 - JLG CONTROL SYSTEM
3121198
– JLG Lift –
6-23
6.9 MACHINE ORIENTATION WHEN
SETTING SPEEDS
LIFT: Telescope retracted, lift up, and record time. Lift
down and record time
SWING: Boom lift at full elevation, telescope retracted,
swing 360 degrees and record time. Swing opposite 360
degrees and record time.
TELESCOPE: Boom lift at full elevation, telescope out and
record time. Tele in and record time.
JIB: Record time for full stroke of jib.
Test Notes
1. Personality settings can be adjusted anywhere
within the adjustment range in order to achieve opti-
mum machine performance.
2. Stop watch should start when function starts.
3. Unless noted, function speeds should be measured
from the platform.
4. All test should be done with the oil temp above 70°F
(21°C).