JLG G12-55A Operator Manual - Manual (Page 126)

Section 7 - Lubrication and Maintenance
7-12 31200745
7.5 OPERATOR MAINTENANCE INSTRUCTIONS
Fuel System
A. Fuel Level Check
1. Check fuel gauge (1) located on instrument panel in cab.
2. If fuel is low, proceed to fuel source and perform “Shut-Down Procedure” on
page 4-4.
3. Turn fuel tank cap (2) and remove from filler neck.
4. Add diesel fuel as needed.
5. Replace and secure fuel tank cap.
Note: Replenish diesel fuel at end of each work shift to minimize condensation.
NOTICE
EQUIPMENT DAMAGE. Do not allow machine to run out of fuel during
operation. See Engine Operation & Maintenance Manual for details prior to
servicing.
10
OW0970 OW0990
OY2990
2
1