JLG G12-55A Operator Manual - Manual (Page 109)

Section 5 - Attachments
5-37 31200745
Grapple Bucket
Use Grapple Bucket Capacity Chart
To determine maximum capacity, refer to “Telehandler/
Attachment/Fork Capacity” on page 5-4.
The joystick (1) controls lift/lower and extend/retract movement of the boom.
The tilt switch (2) controls grapple bucket tilt.
• Press left side of switch to tilt up.
• Press right side of switch to tilt down.
To Open/Close Grapple:
The auxiliary hydraulic joystick (3) controls the open/close movement of the grapple.
• Move joystick right to open grapple.
• Move joystick left to close grapple.
Installation Procedure:
• Refer to “Attachment Installation” on page 5-9.
OZ1450
OY2950
3
1
2