JLG G12-55A Operator Manual - Manual (Page 82)

Section 5 - Attachments
5-10 31200745
Mechanical Quick Switch
This installation procedure is designed for one-person operation. Prior to exiting cab,
perform “Shut-Down Procedure” on page 4-4.
1. Tilt quick switch back to provide clearance.
Check to be sure lock pin is removed.
2. Align attachment pin with recess in attachment.
Raise boom slightly to engage attachment pin in
recess.
3. Tilt quick switch forward to engage attachment.
4. Lift retainer pin and insert lock pin completely
through quick switch. Release retainer pin and
ensure lock pin is secured.
5. If equipped, connect auxiliary hydraulic hoses. See “Hydraulic Operated
Attachment” on page 5-12.
6. If equipped, connect auxiliary electric harness.
OY1550
OY1560
OY1570
OY1580