Hydraulic oil, Hydraulic oil -19 – JLG G12-55A Operator Manual User Manual
Page 133
Advertising
Section 7 - Lubrication and Maintenance
7-19
31200745
Hydraulic Oil
A. Hydraulic Oil Level Check
1. Be sure all cylinders are fully retracted and machine is level.
2. Perform “Shut-Down Procedure” on page 4-4.
3. Open the engine cover.
4. Check level of hydraulic oil at the sight gauge (6) on the hydraulic tank (5). The
oil level should be visible in the sight gauge.
5. If hydraulic oil is low, remove oil fill cap (7) from filler neck. Add hydraulic fluid to
bring oil up to the sight gauge.
6. Replace hydraulic oil fill cap.
7. Close and secure the engine cover.
10
OW0970
OW1030
OY3020
5
6
Advertising
This manual is related to the following products: