JLG 460SJ Operator Manual - Manual (Page 63)

SECTION 4 - MACHINE OPERATION
3121216 – JLG Lift – 4-5
6. Turn key of SELECT switch to PLATFORM.
7. From Platform position POWER/EMERGENCY STOP switch
to ON, then push the ENGINE START switch to the forward
position until engine starts.
NOTE: Footswitch must be in released (up) position before starter will
operate. If starter operates with footswitch in the depressed
position, DO NOT OPERATE MACHINE.
Shutdown Procedure
IF AN ENGINE MALFUNCTION NECESSITATES UNSCHEDULED SHUTDOWN, DETERMINE
AND CORRECT CAUSE BEFORE RESUMING ANY OPERATION.
1. Remove all load and allow engine to operate at low speed
setting for 3-5 minutes; this allows for further reduction of
internal engine temperature.
2. Position POWER/EMERGENCY STOP switch to OFF.
3. Turn key of MASTER switch to OFF position.
NOTE: Refer to Engine Manufacturer’s manual for detailed informa-
tion.