JLG 460SJ Operator Manual - Manual (Page 33)

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
3121216 – JLG Lift – 2-7
11. Footswitch.
FOOTSWITCH MUST BE ADJUSTED SO THAT FUNCTIONS WILL OPERATE WHEN PEDAL IS
APPROXIMATELY AT ITS CENTER OF TRAVEL. IF SWITCH OPERATES WITHIN LAST 1/4" OF
TRAVEL, TOP OR BOTTOM, IT SHOULD BE ADJUSTED.
a. Activate hydraulic system, by depressing footswitch.
Operate Telescope and hold control. Remove foot from
footswitch, motion should stop. If it does not, shut
down machine and contact a trained JLG service tech-
nician.
b. With footswitch depressed, operate Lift and hold con-
trol. Remove foot from footswitch, motion should stop.
If it does not, shut down machine and contact a
trained JLG service technician.
c. With engine power shut down, depress the footswitch.
Attempt to start engine. Engine should not attempt to
start when footswitch is depressed. If starter engages or
engine turns over, shut down machine and contact a
trained JLG service technician.
12. Auxiliary Power.
Operate each function control switch (e.g. Tele, Lift, and
Swing) to ensure they function in both directions using
auxiliary power.
13. Ground Controls.
Place Ground/Platform Select switch to Ground. Start
engine. Platform controls should not operate.