JLG 460SJ Operator Manual - Manual (Page 78)

SECTION 4 - MACHINE OPERATION
4-20 – JLG Lift – 3121216
4.14 PLACARDS AND DECALS
Read and understand all placards and decals. Do not operate
any machine on which DANGER, WARNING, CAUTION OR
INSTRUCTION PLACARDS OR DECALS ARE MISSING OR ILLEGI-
BLE. Replace placards and decals if damaged, missing or illegi-
ble.
Decals are made with a Pressure Sensitive Adhesive on the
back with a protective film on the front. Remove the damaged
decal and thoroughly clean surface before installing a new
decal. Simply peel off the back, and press new decal onto sur-
face and remove the protective film.
NOTE: Placards and Decals can be ordered by using part numbers
located by each placard or decal.