1 introduction, 2 operating specifications, 1 introduction -1 6.2 operating specifications -1 – JLG 460SJ Operator Manual User Manual
Page 97: Operating specifications - 400s, Prior to s/n 0300142870 -1
SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121216
– JLG Lift –
6-1
SECTION 6. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6.1
INTRODUCTION
This section of the manual provides additional necessary infor-
mation to the operator for proper operation and maintenance of
this machine.
The maintenance portion of this section is intended as informa-
tion to assist the machine operator to perform daily maintenance
tasks only, and does not replace the more thorough Preventive
Maintenance and Inspection Schedule included in the Service
and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual (ANSI, CSA)......................3120788
Service and Maintenance Manual (CE, AUS)..........................3120895
Illustrated Parts Manual (ANSI, CSA)
Prior to S/N 96000 .......................................................................3120789
Illustrated Parts Manual (CE, AUS)
Prior to S/N 96000 .......................................................................3120896
Illustrated Parts Manual (Global)
S/N 96000 to Present..................................................................3121236
6.2
OPERATING SPECIFICATIONS
Table 6-1. Operating Specifications - 400S Prior to S/N 0300142870
Maximum Work Load (Capacity):
Unrestricted:
Restricted:
Optional:
Standard
500 lbs. (230 kg.)
1000 lbs. (450 kg)
750 lbs. (340 kg)
Maximum Travel Grade, Stowed Position
(Gradeability) see Figure 4-3.
2 W/D-30%
4 W/D-45%
Maximum Travel Grade, Stowed Position
(Side Slope) see Figure 4-3.
5
o
Maximum Vertical Platform Height:
40 ft. (12 m)
Maximum Horizontal Platform Reach:
34 ft. (10 m.)
Turning Radius (Outside)
16 ft. (5 m.)
Turning Radius (Inside)
6 ft.-8 in. (2 m.)
Overall Width
6ft.- 6in. (1.98 m)
Tail swing
Zero
Stowed Height
7ft. 4in. (2.24 m)