JLG G12-55A AccuPlace Operator Manual - Manual (Page 121)

Section 7 - Lubrication and Maintenance
7-17 3128447
Transmission Oil
A. Transmission Oil Level Check
1. Apply park brake, shift transmission to "Neutral" and lower forks or attachment
to the ground.
2. Check transmission oil level with engine at idle and oil at normal operating
temperature.
3. Open the engine cover.
4. Remove the transmission dipstick (1) and check oil level. The oil level should be
within the "HOT" zone (2).
5. If oil is low, add hydraulic fluid to bring oil up to the "HOT" zone.
6. Replace transmission dipstick.
7. Close and secure the engine cover.
10
OW0970 OW1050
HOT
COLD MIN
2
1
OAL0810