JLG G12-55A AccuPlace Operator Manual - Manual (Page 84)

Section 5 - Attachments
5-16 3128447
Side Tilt Carriage
Use Side Tilt Carriage Capacity Chart
To determine maximum capacity, refer to “Telehandler/
Attachment/Fork Capacity” on page 5-3.
The joystick (1) controls lift/lower and extend/retract movement of the boom.
The attachment tilt roller switch (2) controls carriage tilt.
• Push roller switch down to tilt up.
• Push roller switch up to tilt down.
To Side Tilt:
The auxiliary hydraulic joystick (3) controls carriage side tilt.
• Move joystick right to side tilt right.
• Move joystick left to side tilt left.
Installation Procedure:
• Refer to “Attachment Installation” on page 5-10.
OAL1550
OY1420
1
2
3