JLG G12-55A AccuPlace Operator Manual - Manual (Page 85)

Section 5 - Attachments
5-17 3128447
Operation:
• Approach load with forks centered on load and stop telehandler.
• Level telehandler before side tilting carriage to engage load.
• Side tilt carriage to left or right to align forks with load and engage load.
• Raise load slightly then level carriage side to side.
• Travel in accordance with requirements set forth in Section 1 - General Safety
Practices.
Equipment Damage Precautions:
• Do not use forks as a lever to pry material. Excessive prying forces could
damage forks or machine structure.
• Do not attempt to lift loads that are attached or connected to another object.
WARNING
CRUSH HAZARD. Do not use side tilt to push or pull objects or load. Failure to
comply could cause object or load to fall resulting in death or serious injury.