JLG G12-55A AccuPlace Operator Manual - Manual (Page 55)

Section 3 - Controls and Indicators
3-21 3128447
3.5 BOOM ANGLE AND EXTENSION INDICATORS
• The boom angle indicator (1) is located on the left side of the boom. Use this
indicator to determine the boom angle when using the capacity chart (see “Use
of the Capacity Chart” on page 5-4).
• The boom extension indicators (2) are located on the left side of the boom. Use
these indicators to determine boom extension when using the capacity chart
(see “Use of the Capacity Chart” on page 5-4).
OW1220
1 2
-10 102 0 30 40 50
60 70
80