JLG G12-55A AccuPlace Operator Manual - Manual (Page 98)

Section 5 - Attachments
5-30 3128447
Grapple Bucket
Use Grapple Bucket Capacity Chart
To determine maximum capacity, refer to “Telehandler/
Attachment/Fork Capacity” on page 5-3.
The joystick (1) controls lift/lower and extend/retract movement of the boom.
The attachment tilt roller switch (2) controls bucket tilt.
• Push roller switch down to tilt up.
• Push roller switch up to tilt down.
To open/close grapple:
The auxiliary hydraulic joystick (3) controls the open/close movement of the grapple.
• Move joystick right to open grapple.
• Move joystick left to close grapple.
Installation Procedure:
• Refer to “Attachment Installation” on page 5-10.
OZ1450
OY1600
1
2
3