I.R.I.S. RISCard Anywhere - Manual (Page 10)

Introduction 7
Indicators
Please see below for the lighting patterns of the indicators and their
meanings.
Power Status
Scanning current original. Please wait until the
process is complete before scanning another one.
• When the scanner is connected to a computer: the
battery is fully charged and the scanner is ready for
use.
• When the scanner is not connected: the scanner
power is on and the scanner is ready for use.
• The scanner is powered off.
• The battery is fully charged (when scanner power is
off and connected to a computer).
• Initializing system and memory devices. Please wait
until the process is complete before using the
scanner.
• Busy storing image file. Please wait until the
process is complete before scanning another
original.
Reading/writing data in the scanner memory or
storage devices.
• Paper jam. Please refer to page 20 to remove the
original.
• Calibration error. Retry the calibration following the
instructions in Calibrating the scanner on page 18.
Memory card full (free space below 1MB), card error,
card locked or file system not supported. Please use
another card, delete some files on the card, unlock the
card or re-format the card to the FAT16 or FAT32 file
system.
The battery power is low. Please charge the battery as
soon as possible.
:Blinking green slowly
:Blinking green rapidly
:Blinking yellow slowly
:Blinking yellow rapidly :Steadily on green
:Steadily on yellow
:Off
L
igh
tin
g patte
rn
s
an
d th
eir functiona
l meanings