BMW Navigation Portable Plus - Manual (Page 25)

BMW Navigation Portable Plus Owner’s Manual 
Using The Tools
E
N
2. Touch the rate you want to update.
3. Touch
to erase the current rate. Enter
a new rate, and touch �one .
4. Touch Save to finish.
TiP: Touch restore for original rate.
Unit Converter
1. Touch Tools > Unit Converter .
2. Touch Conversion , select a type of
measurement, and touch OK .
3. Touch a unit of measure that you want to
change.
4. Select a unit of measure, and touch OK .
Repeat, if necessary.
5. Touch the blank rectangle to enter a value.
6. Enter a value, and touch
�one .
7. Touch Clear to enter another
measurement.
Using FM Traffic
Some nüvi packages provide traffic.
Use an FM TMC (Traffic Message Channel)
traffic receiver to receive traffic information
broadcast over the FM Radio Data System.
For information about FM traffic receivers and
coverage areas, see www.garmin.com/traffic .
noTe: Garmin is not responsible for the
accuracy of the traffic information. The
FM traffic receiver simply receives signals
from the traffic service provider and
shows that information on your nüvi.
noTe: The FM traffic receiver and nüvi
must be in data range of an FM station
transmitting TMC data to receive traffic
information.
noTe: For BMW kits that include traffic,
you can only access the traffic information
if the nüvi is connected to the mount.