Ion™ drive setup – IOGear GHE225U Manual User Manual
Page 18
Advertising
16
Step 1. Plug the USB Type mini-B connector into the back of the ION™ Drive.
Hi-Speed USB 2.0 Installation
Note: Before you begin, please make sure that the power to the device and your computer has been turned off.
For Windows® 98SE users, Insert the IOGEAR® Installation CD into your computer’s CD-ROM tray before you
begin. (It is not necessary to install a driver under Windows® 2000, ME, XP) Please refer to page 14 after
completing the instructions on pages 12 and 13. Mac OS users refer to pages 20-
ION™ Drive Setup
Advertising