IOGear GHSW8242 Manual - Manual (Page 17)

17
Menu Sub-Menu page(s)
Input Setting HDMI 1
HDMI device / Blu-ray player / DVD player / Game Console /
Set Top Box / Portable Device / PC
HDMI 2
HDMI 3
HDMI 4
Audio Setting ARC Disable / Enable
Audio Channel AUTO / Stereo / 5.1 Channel / 7.1 Channel
HDMI Audio Output On / Off
OSD Setting Message Display Mode Channel / Full / Off
Transparency 0 ~ 100 (default is 75)
System Setting EDID Auto / Port 1 / Default
CEC Port 1 / Auto / Off
Reset to Default On / Off
Version Version Number
Note:
1. The highlighted texts indicate the GHSW8242’s default setting.
2. The OSD function is disabled while 3D content is being displayed. Switch to 2D content or
a different input port to enable the OSD.
Input Setting Menu
Use this screen to set the naming reference(s) of the video source device(s) for the HDMI input
port(s).
1. Use the drop-down menu to select a
video source device for HDMI 1 input
port. Options are as follows.
2. Do the same for HDMI 2 ~ HDMI 4 input
ports.
OSD Menu
OSD Menu
Use the
MENU pushbutton on the remote control to view the OSD menu and cycle through
the options in the order shown in the table below. See IR Remote Control, page 7 for details on
how to use the remote control.