IOGear GHSW8242 Manual - Manual (Page 23)

23
2. Screw the bracket into any convenient location on the rack.
Note: These screws are not provided. We recommend that you use M5 x 12 Phillips
Type I cross, recessed type screws.
To prevent damage to your installation it is important that all devices are properly grounded.
1. Use a grounding wire to ground the GHSW8242 by connecting one end of the wire to the
grounding terminal, and the other end of the wire to a suitable grounded object.
2. Make sure that the computer(s)/device(s) that the GHSW8242 connects to are properly
grounded.
Grounding