ACU-RITE MILLPWRG2 - Manual (Page 157)

ACU-RITE MILLPWR G2 139
8.1 Milling and Dr
illing
 From the PGM screen, locate the lines where the chamfer is to be
inserted between.
 Highlight the second line.
 Press the BLEND key.
 Press the Chamfer soft key after the dialogue opens.
 Check that the steps listed in the FROM and TO fields are the steps
to be blended. If they're incorrect, press the CANCEL key and
highlight the appropriate step.
 For Length 1, enter the distance from the common point to the
FROM line.
 For Length 2, enter the distance from the common point to the TO
line.
 Press the Closed Contour soft key to chamfer the end of a contour
with the beginning.
 Press the USE key.