ACU-RITE MILLPWRG2 - Manual (Page 38)

20 1 Introduction
1
.3 Cons
ol
e
Console Keypad
The following keys are located on the console keypad. There is also a
quick reference guide located at the beginning of this manual on page
ii of the inside front cover.
1 Axis keys, use to select the required axis.
2 Numeric keys, use to enter numeric data.
3 CANCEL key, use to cancel current action.
4 CLEAR key, use to clear selections such as values entered in a
field.
5 ARROW keys, use to navigate around the screen, and highlight
dialogue fields. Also used to move the table axes.
6 STOP key, use to pause, or stop a program that is running, or a
machine operation.
7 GO key, use to start, or resume a program.
8 USE key, use to complete an operation, i.e. data values entered in
a dialogue.
9 ENTER key, use to activate selections, and entries.
10 +/- key, use to toggle key for “Plus/Minus” data entry.
11 CALC key, opens the fully functional calculator.
12 Function keys, select appropriate key for quick access to the
function and data entry.
13 Milling function keys. Selection of appropriate key provides direct
access to the milling function dialogue.