ACU-RITE MILLPWRG2 - Manual (Page 8)

viii
Manual Inf
o
rm
ation
Changed Functions of Software
751005-01-01
 Blend/Chamfer information input in Section 8.1 has been redefined.
 Preset Moves information input in Section 2.2 has been redefined.
 Display:Peck\Pass in Section 9.1 has a note added that the limit of
pecks or passes is 9999.
751005-01-02
 The off-line software described in Section 11.1now requires the
purchase of a USB Protection Module for operation.
 Custom Pocket: The tool path for custom pockets and islands,
described in Section 8.2, has changed to use the programmed
cutting convention.
751005-01-03
 A message box warning that the table limits are not established prior
to homing was added to Section 1.1.
751005-01-04
 Part Graphics: The show tool path and show step number options
were removed from the graphics view in Section 5.1.
 Probing examples were added to Section 6.1.