ADS-TEC OPC6012/6015 - Manual (Page 18)

OPC6012/6015 17
© ads‐tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden‐Echterdingen
5 Operation
5.1 Front Control Keys
Abb. 4:
Depending on the device equipment version, an operating system (Windows CE.net, Windows XP
embedded or Windows XP Prof.) and a soft keyboard are already installed ex factory. The keys on
the front panel are occupied with the following functions by a specific driver in the soft keyboard:
Level 1:
Activate and deactivate the soft keyboard for letter/character input
using the touch screen.
Level 2:
Decrease display brightness
Level 1:
Change task (Alt+ESC) in Windows.
Level 2:
Increase display brightness.
Level 1:
Not connected
Level 2:
The volume can be decreased with devices equipped with an audio
output.
Level 1:
Right mouse‐key function.
Level 2:
The volume can be increased with devices equipped with an audio
output.
Shift key (SHIFT) for activating the second keyboard level. This key must
be pressed simultaneously with the desired function key
Note:
If the software keyboard is not installed, only the functions for display settings and
volume control are active. The controller display will not be output on the display, in
this case.
The key functions can be modified in accordance with customer specific requirements.
Above described functions are pre‐set ex works.