ADS-TEC OPC6012/6015 - Manual (Page 34)

OPC6012/6015 33
© ads‐tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden‐Echterdingen
8.1.4 USB‐Lock Function
The USB lock function enables you to lock the USB ports, if required, and to avoid access by unauthorised people.
Feedback
In the Messaging section, you can set up whether a message should be output in the event that a USB port is
locked or not. Additionally, the locking process can be logged in the event log
Password Protection
In order to avoid any unauthorised access to the USB Lock programme, the settings made can be provided with
password protection. In this case, the settings can only be modified if the password was entered correctly.
USB Ports
The desired USB ports can individually be locked by using the Lock button.
All changes must be confirmed with the Save button.