AiM GPS05 Module - Manual (Page 21)

GPS05 Module
User manual
Release 1.01
2 6
4.5 – MyChron4: Data visualisation
When GPS05 Module is connected to MyChron4, switching the logger on GPS05
Module
recognition window appears.
•
MyChron4
, eBox Gold and
GPS Firmware versions
• EU = European version; USA =
American Version
3 2
4.5.1 – Data visualisation while recording
Pressing “ON/VIEW” button, MyChron4 display shows, under the RPM bar graph,
GPS speed value with the related unit of measure (kmh/mph). Pressing again
“ON/VIEW” button the following window appears:
• Number of received satellites
• GPS Status:
o
SEARCH=searching for
satellites
o
BAD=reception is bad;
o
WEAK=signal is weak;
o
GOOD=reception is ok
• GPS Speed
To come back to the first page, click twice “ON/VIEW” button.
3 3
4.5.2 – Data visualization during data recall
The logger shows some additional information (please refer to MyChron4 user
manual for further information):
“Session summary” page shows max
GPS speed peak of the test.
“Splits of selected lap” page shows max
and min peaks of GPS speed of the lap.
1 7
4.6 – MyChron4 Data key for data download
Software, Data key working mode and data download are the same of MyChron4.
Please refer to MyChron4 user manual for further information.
www.aim-sportline.com 20