AiM GPS05 Module - Manual (Page 6)

GPS05 Module
User manual
Release 1.01
2 0
2.2 – Connection with additional peripherals
The figure above shows a CAN network of LCU-ONE and GPS05 Module.
Peripherals can be connected to Data Hub using one of the 4 CAN inputs.
The CAN network can be further increased using the same logic.
To connect MXL Pista to GPS05 Module use the 5 pins connector mounted on the
logger back side as shown below.
To connect MXL Pro connect GPS05 Module to the CAN cable labelled EXP
(expansion) of the logger wiring.
www.aim-sportline.com 5